JANOME DC4030P Libretto delle Istruzioni Pagina 36
- Pagina / 88
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
32
• To sew
Raise the presser foot and position the fabric next to a
seam guide line on the needle plate (5/8˝ (1.6 cm) is most
common). Lower the needle to the point where you want
to start. Lower the presser foot and pull the threads
toward the back. Depress the foot control or press the
start/stop button. Gently guide the fabric along a seam
guide line letting the fabric feed naturally.
CAUTION:
Do not place fingers near to the presser foot when guiding
fabric, or the needle clamp screw may strike and injure
your fingers.
• Changing sewing direction
Stop the machine and bring the needle down into the
fabric by pressing the up/down needle position button.
Raise the presser foot.
Pivot the fabric around the needle to change sewing
direction as desired. Lower the presser foot.
q Up/down needle position button
w Presser foot lifter
q
w
e
SECTION III. BASIC SEWING
qwe
q
w
Straight Stitch
q Stitch pattern:
w Needle thread tension: A
e Presser foot: Zigzag foot: A
• Finishing sewing
q Reverse stitch button
w Thread cutter
e Fabric
To fasten the ends of a seam, press the reverse stitch
button and sew several reverse stitches. Raise the
presser foot. Remove the fabric e, draw the threads to
the back and cut them with the thread cutter w. The
threads are cut the proper length to begin sewing the
next seam.
— When pattern ( ) is selected, reverse stitches
are sewn automatically at the beginning of the seam,
then sewing continues forward.
When you reach the end edge of the fabric, press
the reverse stitch button q once.
The machine will sew four reverse stitches, four
forward stitches then stop sewing.
- INSTRUCTION BOOK 1
- MANUAL DE INSTRUCCIONES 1
- MANUEL DʼINSTRUCTIONS 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- SAVE THESE INSTRUCTIONS 2
- CONSERVE ESTAS INSTRUCCIONES 3
- CONSERVER CES INSTRUCTIONS 4
- TABLE OF CONTENTS 5
- TABLE DES MATIÈRES 7
- SECTION I. NAME OF PARTS 8
- Nombre de las piezas 9
- Nom des pièces 9
- Standard Accessories 10
- Accessorios Estandares 11
- Accessoires Standard 11
- CAUTION: 12
- AVERTISSEMENT: 13
- ATENCIÓN: 13
- Machine Operating Buttons 14
- Controlling Sewing Speed 14
- Operating Instructions: 14
- Speed Control Slider 14
- Start/stop button 16
- Presser Foot Lifter 18
- Thread Cutter 18
- Extension Table 18
- To Drop or Raise the Feed Dog 20
- Carrying Handle 20
- ATTENTION: 25
- PRECAUCIÓN: 25
- ATTENTION 31
- Drawing Up Bobbin Thread 32
- SECTION III. BASIC SEWING 36
- PARTIE III. POINTS DE BASE 37
- SECCIÓN III. PUNTADAS BÁSICAS 37
- Quilting 38
- Sewing on Heavy Fabrics 40
- Manual Stitch Length 40
- Variable Needle Position 40
- Automatic Reverse Stitch 42
- Triple Stretch Stitch 42
- Pintucking 42
- Auto-lock Stitch 44
- Saddle Stitch 44
- Straight Stretch 44
- Overcasting 46
- Zigzag Stitch 46
- Puntada de zig-zag 47
- Points zigzag 47
- Surfilage 47
- Tricot Stitch 48
- Overedge Stitch 48
- Serging Stitch 48
- Puntada de sobrehilado 49
- Point de surjet 49
- Button Sewing 50
- Costura de botones 51
- Pose des boutons 51
- Automatic Buttonhole 52
- Boutonnière automatique 53
- Ojales automáticos 53
- Double Layer Buttonhole 56
- Knit Buttonhole 58
- Faux Chain Buttonhole 58
- Stretch Buttonhole 58
- Corded Buttonhole 60
- Boutonnière cordonnet 61
- Ojal acordonado 61
- Zipper Sewing 62
- Couture des fermetures éclair 63
- Aplicación de cremalleras 63
- Zipper Sewing (continued) 64
- Blind Hemming 66
- L’ourlet invisible 67
- Bartacking 68
- Hilván de barra 69
- Les points de fixation 69
- Applique 70
- Patchwork 70
- Appliqué 71
- Aplicación 71
- L1 L2 L3 L4 L5 72
- Costura de puntada de satín 73
- Point lancé 73
- Alargamiento 73
- Allongement 73
- Patron de costura decorativa 75
- La motifs décoratifs 75
- Adjusting Pattern Balance 76
- Équilibrer un motif 77
- Ajuste de balance del patrón 77
- WARNING: 78
- PARTIE IV. ENTRETIEN DE VOTRE 79
- Replacing the Light Bulb 80
- Attaching the Light Bulb 80
- Cómo quitar la bombilla 81
- Instalación de la bombilla 81
- Remplacement de l’ampoule 81
- Problems and Warning Signals 82
- Problèmes et signaux d’alerte 84
- Troubleshooting 85
- Problema 86
- Referencia 86
- Problème 87
- En cas de problème 87
- 807-800-195 (E/S/F) 88
Prodotti e manuali riguardandi Macchine da cucire JANOME DC4030P
(44 pagine)
(75 pagine)
(64 pagine)
Macchine da cucire JANOME MS-5027 Manuale Utente
(111 pagine)
(111 pagine)
© 2020, manymanuals.it. Tutti i diritti riservati | 0.131 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale